Custom Buttons on Remote

The Remote Control has the option to customize the 2-dot (..) and 3-dot (…) Function buttons with up to three Scenes per button to allow flexible control.

1. Go to ‘Devices’ tab and select the Area that contains the Remote that you want to customize.

2. Access the Remote Device Settings by clicking ‘…’

3. Tap and quickly release the center button & 2-dot button at the same time to “Wake Up” the remote

Note: Be careful not to hold these buttons too long, you might reset the Remote.

4. When the Remote is “awake” the message will disappear and you’ll notice the green status bars next to the device name indicating the Remote is online. Scroll down and select the “••” or “•••” button you want to customize.

5. Select ‘Custom’ and click ‘Add Scene’.

6. Assign up to 3 Scenes to cycle through when the button is pressed on the Remote.

7. Confirm assigned Scenes and click ‘Done’.

8. The assigned scene(s) will now be listed as the settings for that button on the Remote.

Tip: When any button is pressed on the Remote you will see a green indicator light in the top left corner on the face of the Remote.

Tip: If you see a slow red flashing light in the top left corner on the face of the remote, this means that the Remote did not properly pair. Delete the Remote from the app and try to re-pair.